Recording Resolution: Front 4K + Rear 1080P

Loop Record Options: 1 Minute / 2 Minutes / 3 Minutes

Screen Size: 3.00" HD IPS

Working Temperature: -4°F ~ 158°F

Memory Card: 8 GB - 128 GB

WiFi/APP: Support

Super Night Vision: Support

G-Sensor: Support

Languages: English, Japanese, French, Italian, German, Spanish,Thai, Russian, Chinese(simplified, Traditional),
Korean, etc.

• MF4K K1

For safety and functionality reasons, this dash cam is designed without a built-in battery and therefore cannot be turned on without a connected car charger or other power source.

• MF4K X2

For safety and functionality reasons, the dash cam's built-in battery is designed to be very small, so when not linked to an external power source, the standby time is very short, and may turn off automatically after a few tens of seconds. Note that this is not a malfunction.

• All Dash Cam

Before powering on, please make sure that the cameras and wires are properly linked and have been connected to a car charger or other power source, otherwise the product will not work properly.

1. Insert Memory Card

• Insert the memory card into the Dash Cam until it clicks into the slot.
• Please make sure the memory card is oriented correctly

2. Front Camera Installation

• Wipe the front windshield where the front camera needs to be installed with a clean cloth.
• Peel off the 3M adhesive sticker of the front camera and attach it to the front windshield.

3. Rear Camera Installation (MF4K K1)

• Open the trunk of the vehicle, remove the screws, remove the plastic panel.
• Pry open the license plate light and pass the rear camera cable through the hole where the license plate light is located.

3. Rear Camera Installation (MF4K X2)

• Wipe the rear windshield where the rear camera needs to be installed with a clean cloth.
• Peel off the 3M adhesive sticker of the rear camera and attach it to the rear windshield.

4. Wire Layout In The Vehicle

• Connect the car charger to the cigar socket.
• Connect the other end of the car charger to the dash cam.
• Use the crowbar to run the power cable along the front windshield and the roof, and hide the cable down the A-pillar, so as not to block the driver's sight and cause danger.
• Connect the rear camera cable to the port on the dash cam.
• Hide the rear cam cable along the gaps between the front windshield and the ceiling, between the car body and the ceiling on the side of the passenger seat, and between the rear seats and the ceiling.

Not at all. As long as the dash cam is linked to the car charger, every time you start the engine, the dash cam will automatically turn on the recording.